How do you clean a whirlpool tub?

A hot tub in the garden is a wonderful way to leave the stress of everyday life behind and relax. However, as with any other outdoor element, regular cleaning and care is essential to ensure the hygienic cleanliness and functionality of your hot tub.

This guide provides you with all the important information and practical tips you need to clean your hot tub optimally and enjoy it for a long time.

Basic cleaning: how it works

Regular basic cleaning is crucial to effectively remove dirt, deposits and bacteria. Ideally, you should completely drain the water from your hot tub and clean the tub every three to four months.

Step-by-step instructions for basic cleaning:

  1. Drain the whirlpool tub:
    Drain the water completely.

  2. Select cleaning agent:
    Use a special whirlpool cleaner that is gentle on the surface. Avoid aggressive household cleaners as they can damage the surface or cause foaming. Alternatively, diluted vinegar essence is a suitable natural cleaning agent.

  3. Cleaning:
    Spray the cleaner onto a soft cloth or sponge and wipe the bath thoroughly. Make sure that the cleaner does not get into the drain pipe.

  4. Rinse:
    Rinse the tub thoroughly with clean water to remove all detergent residue.

  5. Fill the whirlpool tub:
    Fill the tub with fresh water.

  6. Water care:
    Add the necessary water care products to ensure a hygienic bathing experience.

Get rid of the annoying foam ring

A common problem with whirlpools is the so-called foam ring that appears at the water level. This is caused by residues of body care products, sun cream, oils or unbalanced water chemistry.

How to remove the foam ring:

  • With whirlpool cleaner: Apply some cleaner to a soft cloth and gently rub off the foam ring.

  • With vinegar: Alternatively, use diluted vinegar essence on a cloth to remove the foam ring.

Prevention:

  • Shower before bathing to minimize residues of cosmetics and care products.

  • Clean the hot tub regularly and use a suitable disinfectant to reduce impurities in the water.


Remove and prevent stains

Stains and discoloration in the whirlpool tub can be caused by metals in the water, soap scum, mineral deposits or unbalanced water chemistry.

Remove stains effectively:

  • With whirlpool tub cleaner: Clean the tub thoroughly with a cleaner specifically designed for this purpose.

  • With baking soda: Gently rub stubborn stains with a damp sponge and baking soda.

  • With vinegar essence: Diluted vinegar essence helps with stains caused by limescale or mineral deposits.

  • With a melamine sponge: Carefully remove stains with a melamine sponge. However, be careful not to scratch the surface.

Preventing stains:

  • Ensure careful water maintenance and test the water values regularly.

  • Clean the filter regularly to minimize deposits and impurities.

Polishing the whirlpool tub: For shine and protection

To extend the service life of your whirlpool tub and give it a radiant shine, it is advisable to polish the tub regularly.

  • Use a special polishing agent for acrylic tubs.

  • The polish forms a protective layer that prevents scratches, stains and other damage.

  • Polish the bathtub after basic cleaning as part of your quarterly maintenance.